I lost the keys to my 1997 Chevy 1500. I got a replacemen...
Responses
Your Auto Inspector
271 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I’ll be glad to assist you with your question today. I am an ASE certified technician and Service Manager with over 20 years of hands on experience helping to provide solutions for my customer’s issues. My experience includes both dealership and independent repair facilities in technical and customer facing roles, so I have the ability to handle the technical aspects and communicate them efficiently and effectively as possible. <u><strong>During this conversation you will receive an automatic offer for a phone call. This offer is not generated by me but by the website and is outside of my control.</strong></u>
I’m sorry that you’re having unexpected issues with your vehicle and I will do my best to help you resolve them. Please understand that through this process we will be working together. As I am not there, you might be asked to work as my eyes and ears to help gather basic information to help identify and resolve your specific problem. As I don’t know your level of expertise, please don’t be offended if the questions I ask seem rudimentary, I am simply trying to guide you through the issue as simply and accurately as possible.
My aim is to give you the best service possible by providing an accurate answer. Unfortunately, as you may be aware an accurate answer is not always a popular answer. Sometimes it will take me time to respond as I review your information, compare it to my resources and think through the potential options to ensure my answer is as accurate as possible. I appreciate your patience and remember even if I don’t respond immediately I am working diligently on your issue.
Your Auto Inspector
271 days ago
If you have installed the ignition lock cylinder properly then the issue is with the ignition switch itself. Please watch the video below to make sure you have followed the proper steps when installing the cylinder (begin around the 7 minute mark). As you've drilled it out you most likely did not pull the steering wheel. However, to pull the cylinder out to check/replace the ignition switch you will have to. The good news is if you installed the cylinder correctly this should be the only other potential issue as you've described it.
[https://www.youtube.com/watch?v=vBxuTKqd9Is](https://www.youtube.com/watch?v=vBxuTKqd9Is)
I’m glad that I was able to answer your question today. My goal is to ensure you receive a 5 STAR experience. Once you’re satisfied with my answer please take the time to rate me 5 stars at the top of your computer screen or by following the link on your phone. These ratings are extremely important to us experts. Tips are never expected by greatly appreciated as they make up a large part of our income. If you have further questions please request me by opening a new question and I’ll be glad to help you with any of your automotive issues. Thanks for using Just Answer!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do you use the “Max A/C” setting?
Your car is equipped with both standard Air Conditioning and a “Max A/C” setting. While the regular air conditioner will keep you comfortable at highway speeds, you may need to use the “Max A/C” setting if it’s extremely hot outside...
What does the anti-lock brake system (ABS) Warning Light mean?
The anti-lock brake system (ABS) Warning Light is located on the instrument panel. When this light is illuminated, it means that there is an issue with your ABS. Since the ABS is a key part of your brake system, you...
Keep getting Battery saver mode on my message screen and i replaced the battery like the dealer said.. message came back on?
Hello. A battery saver mode light can sometimes be set off by an issue with the battery (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-battery), but it is also often set off if a problem occurs with the alternator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-alternator), such as low or excessive output from...
Truck makes a squealing noise when starting - 2002 Dodge Ram 1500
Have you checked the condition of the drive belt? If the belt is very loose or worn, it may cause noises when there is a load put on the belt drive. If the belt looks like it is in bad...
When backing up, my car makes a rocking noise.
The noise is the parking brakes are out of adjustment and the brakes are dragging. Check the rear brakes and see if they are releasing when going in reverse. If you need further assistance with your brake system (https://www.yourmechanic.com/services/parking-emergency-brake-does-not-work-inspection), then...
Where are the motor mounts location on a 2004 Ford Free star. I see the top one. Need to life motor to replace water pump. 2004 Ford Freestyle
Hi there - there are actually 4 mounts (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount) that locate the engine/transmission as a unit. The top link (you've already identified) is, complemented by 3 additional mounts around the lower perimeter of the engine/transmission, attaching the unit to the...
Low oil frequently
It is considered normal for a cars engine to consume some oil under normal conditions. Most manufacturers have an amount for their engine oil consumption and is on average a quart of oil for every 1000 miles is considered normal....
Electronic power steering was damaged from improper tow I patched eps however truck will not turn over. Serv.elect.throt.Cont
Inasmuch as you disconnected the battery, check to be sure that the engine immobilizer has not become activated (https://www.yourmechanic.com/article/how-to-shut-off-the-anti-theft-device-in-your-car-by-jason-unrau). With a fully charged battery in good condition, and the immobilizer (security) system off, if the starter motor does not operate...
Browse other content
Maintenance
Estimates
I lost the keys to my 1997 Chevy 1500. I got a replacement lock cylinder and keys. I had to drill the old one out to be able to turn it to the start position to release it and remove the old lock cylinder. I put the new one in and...
I lost the keys to my 1997 Chevy 1500. I got a replacement lock cylinder and keys. I had to drill the old one out to be able to turn it to the start position to release it and remove the old lock cylinder. I put the new one in and now there's no resistance when I turn it to the start position, none of the dash lights up and the radio is on at all times. I was careful when drilling to be sure I didn't wreck anything. don't believe that I did but I don't know what the heck is going on right now. What I mean by no resistance is that there does not feel like there is a spring or anyting to return it to the Run position after I turn it to start. Nothing kicks in like the fuel pump, windows and locks don't work, blower fan or anything else that should when the key is on. Thanks for any help! Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? Yes Mechanic's Assistant: Are you fixing your Kicks yourself? What have you tried so far? Kicks?