I had my [ignition coil](/topics-ignition-coil-chevy/) re...

I had my [ignition coil](/topics-ignition-coil-chevy/) replaced and battery replaced the car runs but my stability trak light comes on and my [engine](/topics-engine-chevy/) light comes on Mechanic's Assistant: Has your ve...

I had my [ignition coil](/topics-ignition-coil-chevy/) replaced and battery replaced the car runs but my stability trak light comes on and my [engine](/topics-engine-chevy/) light comes on Mechanic's Assistant: Has your vehicle stalled? Has anyone run a diagnostic test to pull the trouble code? Yes my vehicle stalls not wanting to go any faster Mechanic's Assistant: What is the make/model/year of your car? 2015 chevy cruze Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? No I'm no mechanic will a bad PCM cause the stability trak light to come after a coil replacement was done

Automotive Expert
Hello I'm Rick from just answer, sorry to hear about your cruze issues as I know how frustrating this can be, if you see a phone call request you can just ignore that..... Have you scanned this for any codes?...

Has my ECU is damaged
Automotive Expert
I would suggest taking off the battery cables and holding them together for at least a minute and then reconnect both of them and double-check the connections as these are known for negative battery cable issues causing your symptoms, I would try this before getting any more involved with issues such as the ECM

That's what I was told from the codes I have a new battery installed already
Automotive Expert
Have you checked the negative battery cable and we're at bolts to the vehicle?
Automotive Expert
Ok It is a common issue on these vehicles to cause that is why I mentioned that.... What exactly was your code?

I have to find it
Automotive Expert
You could have a speed sensor at fault as well that would cause this concern, if you turn off your traction control will It drive normal?

I was told that I would need a new ECM
Automotive Expert
When you get a chance let me know what code or codes are in the system thank you

Will do
Automotive Expert

What others are asking

What can I do if the remote keyless entry remote only works up close?
The remote keyless entry system is not only a great convenience, but it increases vehicle security by being able to lock or unlock the doors from a distance. If the range of the remote decreases, there are a few points...
Car did not engage going forward, nor in reverse
Hi we will be happy to help. The issue you are experiencing is likely due to a form of preventive maintenance that your vehicle needs. The maintenance that I'm referring to is the clutch actuator adjustment. Overtime, the clutch will...
Blinking Check Engine Light, issues with rpm, possible spark plug issue?
Hey there. The gas smell you experience is most likely due to the unburned fuel due to the engine misfiring. Since you smell unburned fuel, the cause is most likely spark-related. If any spark plug is not firing correctly, the...
Noise in CV Joint
CV joint failure is very common on front wheel drive cars like yours. The CV joints are a ball-in-groove arrangement that allows the axle to drive the front wheels while the wheels are steering. When they get some age on...
Car will not crank after putting in a new starter. Forced starter to start up and engine starts but stalls out. Will the security continue to cut off fuel while force starting?
Hi there. Forcing the starter to engage to make the engine run without the ignition engaging the starter will continue to keep the security on. This is a safety feature that keeps people from stealing your vehicle. I recommend replacing...
Engine Stutter On Acceleration
It's likely that If you were to scan the engine controller, (ECU) you would probably find several misfire codes. The misfire codes can indicate specifically which cylinder if malfunctioning. Your model car has a history of coil and ignition module...
Loss of power when accelerating and burning smell.
Hi There, This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) monitors air intake as it is mixed with fuel prior to being...
Gas meter always says full won't allow me to put full up on gas what can I do??
Hi There, It sounds like you may have two separate issues going on here. Your fuel tank sending unit (https://www.yourmechanic.com/services/fuel-gauge-sender-replacement) is a unit that monitors the fuel level in your tank. When this is not working properly, you may notice...