Hi there,bought a chevy silverado '91,got a problem with ...


Hi there,bought a chevy silverado '91,got a problem with it ,don't idle well but runs goodd sometimes Mechanic's Assistant: How many miles are on the Chevy? What size is the [engine](/topics-engine-chevy/)? Engine 4.3 L V...

Hi there,bought a chevy silverado '91,got a problem with it ,don't idle well but runs goodd sometimes Mechanic's Assistant: How many miles are on the Chevy? What size is the [engine](/topics-engine-chevy/)? Engine 4.3 L V6 ,miles teller defect Mechanic's Assistant: What is the model/year of your Chevy? 1991 Silverado Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I have change ,Idle contr, valve,sparkplug cables,coil ,mop sensor pending to change tps sensor

Automotive Expert
Hello there and thank you for contacting JustAnswer, I’ll do my best to help you out solve this issue, did you check for any vacuum leaks?

i find one ,and did resolv it
Automotive Expert
does idle high or low?

it iddle low ,but sometimes hight,and i smell fuel also
Automotive Expert
Have checked your sensors o2 sensor?

not yetcould it be o2 sensor?
Automotive Expert
Possibly because you’ve done everything I can think of.

what about the injectors? is it posible that they are thirtty
Automotive Expert
That could be it also try injectors cleaner.

okwhat else could cause me that problem
Automotive Expert
Sometimes scanners can diagnose if they are bad.Injectors

ok, so there is nothing else that ccould be the problem
Automotive Expert
I would start there and hopefully this solves it.

ok ,thx
Automotive Expert
You’re welcome.

What others are asking

Wiper motor not working.
Hi there. Your windshield wipers can stop working for a number or reasons. It may as simple as a blown fuse or it can be a wiper motor or other circuit issue. Check fuse B13 in the fuse box under...
Indicator light on.
This is a Master Warning Light meaning to check your Multi-Information Display for a warning message. Once the warning message is corrected then the light should turn off. If for whatever reason you are unable to correct the cause of...
Car overheating.
You would have to start with checking the coolant level. If it is low, you would have to pressure test it to find out where it is leaking. If it is not low you could either have a circulation or...
I changed the coil pack spark plugs and plug wires my car still runs bad why
If the engine is running bad then you should be getting a code set in the computer. If not, then a scanner should be used to view data to see if the engine is running lean or rich. Check the...
Whisting noise when increasing or decreasing speed
There is a tensioner pulley (https://www.yourmechanic.com/services/drive-belt-tensioner-replacement) that keeps the correct amount of tension on your serpentine belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement). When these bearings wear out, they can cause this type of a whistling sound that you describe. This is a quick fix...
Will the Ford L8 Duratec engine fit in a MX5 Mk3?
Hi there. The Ford engine will not bolt up to your Mazda transmission, however, you can purchase a conversion plate that would allow the engine to bolt up to the transmission. If you do this, you will need to get...
I accidently over filled my oil 1qt will I be alright
If you overfilled the oil the crankshaft could contact the oil in the pan and cause the oil to foam up and cause engine to suck in the aerated oil into the oil pump and this could cause bearings to...
My 2008 Nissan Sentra tail light/running light fuse keeps blowing. I'll change it and within 2 days it blows again. What u think?
The first thing you should do is replace the rear bulbs for the parking lights since they may be intermittently grounding out inside the bulbs. If still continues then replace front bulbs. If still continues then you will need to...
can't shift gears
Assuming the transmission fluid level is adequate, the problem you are describing is due to either a clutch system fault or an internal transmission fault such as worn synchronizers, hub gear, or hub assembly. If the clutch needs service, that...