I have a 2004 Chevrolet Aveo LS and I have a vaccum leak


I have a 2004 Chevrolet Aveo LS and I have a vaccum leak Mechanic's Assistant: How old are the hoses? And what driving conditions do you most often encounter? I don’t know how old the hoses are and I recently brought the ...

I have a 2004 Chevrolet Aveo LS and I have a vaccum leak Mechanic's Assistant: How old are the hoses? And what driving conditions do you most often encounter? I don’t know how old the hoses are and I recently brought the car Mechanic's Assistant: Are you fixing your Aveo yourself? What have you tried so far? I haven’t done anything to the car yet Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No . I want to know how much it’s gonna be to get the hose replaced

Automotive Expert
Hello, do you know the source of your vacuum leak? Vacuum leaks can be from many different components? Thank you

I do not . I just recently brought the vehicle.
Automotive Expert
Ok - if it is a simple hose that is leaking, it shouldn't be more than around $50-75 - if it is a component like an intake manifold gasket, that would be a few hundred

Okay

What others are asking

How do I turn off the StabiliTrak?
The traction control system (TCS) and StabiliTrak system are crucial parts of your vehicle’s safety. TCS and StabiliTrak limit wheel spin, and keep your vehicle driving securely and safely, especially in adverse weather conditions. However, you can turn off the...
Warning lights after ABS brake flex lines replaced
The rear lights, including the brake lights, all go through the light control module and should have nothing to do with the ABS system. You may have bad bulbs (https://www.yourmechanic.com/services/brake-light-bulb-replacement). Have them checked to see if one or more brake...
Vacuum hose unhooked brake - 1990 Dodge D150
Hello. The vacuum hose (https://www.yourmechanic.com/services/brake-booster-vacuum-pump-replacement) from the brake booster goes into a tube on the intake. This tube is going to be about the same diameter as the hose and may need a clamp to secure it properly. The small...
vibration in steering wheel when break
Hello, thank you for writing in. The steering, suspension, and brakes are all closely related. The first place you often feel issues is in the steering wheel (https://www.yourmechanic.com/services/steering-wheel-vibrates-or-shakes-inspection). The best option is to give all three systems a full inspection....
Overheating.
Hi There, This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or a failing coolant fan switch. The coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper...
Hello . When passenger airbag sign is off , does it mean that all the airbags are off or only the passengers airbags ? Thank you
If there are no warning lights on when the engine is running, all of the airbags are active. That is the default mode. About twelve years ago the DMV required that the driver be given control of whether the passenger...
Oil leak issues
If you open the oil cap while the engine is running to see if excessive amounts of oil smoke comes out indicating the engine has excessive blow by the pistons. The engine piston rings are most likely not sealing. You...
When i purchased my used car the check engine light was on . But I was told it was nothing that it would go off . A week later my
If oil and coolant have mixed or are mixing, whether in the radiator or in the crankcase, the cause of those "leaks" has to be identified and repaired first. If you were to diagnose the no start condition, even if...
06 lexus gx470 - When braking , the steering wheel shakes and the car pulls to the right . 88k miles .. Rotors ?
Pulling to one side, without the brakes applied, is caused by misalignment, tire defects or uneven tire inflation (from side to side). Vibration on braking is typically due to rotor runout and/or thickness variation in the rotor(s). Vibration at speed,...