Q: How do I adjust the brightness of the instrument panel?

asked by on

How do I adjust the brightness of the instrument panel?

The brightness of the instrument panel can be adjusted to your liking. To adjust the brightness, locate the instrument panel light control, which is on the bottom right side of the instrument panel. Rotate the control clockwise to brighten the instrument panel, or counterclockwise to dim it.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the brightness of the instrument panel?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: How do I use the sun visor?

The sun visor can shield you from bright sunlight and glare. To use either sun visor, manually fold it down, towards the windshield. You can also block sunlight from the windows by unlatching the visor and rotating it towards the...

Q: Putting in a new battery but the horn, lights, and wipers come on and won't stop.

Check the light switch, the horn switch, and wiper switch. If the switches are not working, then they will need to be replaced. If the switches are good, then there is a loose or broken ground wire on the steering...

Q: Rattling when accelerating and oil light comes on when I hit the brakes

Hi there. It seems that the oil may be too low or too high. Check the engine oil and see if the oil is lower than normal or higher than normal. Drain out the engine oil and remove the oil...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.