Q: Car shutting off.

asked by on January 05, 2016

The heat sensor has wiring issues and the car shuts off.

I would recommend that you ask for help from a mechanic to properly repair your wiring. Once the wiring is repaired he can check to make sure that there are no more problems with your vehicle and that the wiring repair fixed your vehicle.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Alternator Pulley came off!!

Hello there, many faults will cause the alternator pulley to fail on your 2003 Volkswagen Golf. When the pulley assembly fails on the alternator it is most often due to a seized alternator bearings. To remedy this issue properly the...

Head gasket or not?

If it is confirmed (i.e., no false positive) that exhaust gas is present in the coolant, that means one of three things: the head gasket is leaking, the head has a crack in it (not unusual) or the block is...

Coolant leaking from car

Just in front of the right front tire there is an auxiliary radiator that has an air scoop that directs air towards it to increase the cooling capacity of the cooling system. It is possible that road debris may have...

my vw 04 beetle ticks when idling, the ticking goes away when you give it gas.

The problem sounds like you have low oil pressure and and engine knock due to engine rod bearing or crankshaft bearings are worn. You may also want to have front crankshaft pulley checked to see if it is bad before...

Check Engine Light on - P2187 and P0420 codes

Hello. If I understand correctly, when you say "catless downpipe," you mean that you have installed a pipe without a catalytic converter. If that is the case, you are always going to have the code for catalyst efficiency. The...

smoke/steam coming form dipstick 2009 VW GTI Turbo

Hello - it is normal to have a small amount of "fumes" exit the dipstick when it is pulled. The crankcase, is after all, a pretty violent place - oil and extreme temperatures combined with rotating hot metal. If you...

The car shudders between the speeds of 25 mph to 45 mph when accelerating. What is the problem?

Hi there. Check the engine and transmission mounts on your vehicle. When accelerating quickly, the engine and transmission move around causing the loose or broken mounts to make the engine and transmission move around violently making the front tires to...

2016 vw tiguan ac compressor failed do i need to replace ac condenser aswell

If the failure caused the system to be contaminated with metallic debris, the condenser would certainly have to be carefully inspected and might have to be replaced depending on what that inspection reveals. If there is no system contamination from...

How can I tell if the problem I have is with the master or slave clutch cylinder? 2008 VW Eos

Hello, thank you for writing in. Your question cannot be technically answered at this point in time. With your symptoms, it could be either the slave or the master cylinder. The clutch master cylinder is more commonly a problem, but...

Related articles

Volkswagen Certified Pre-Owned (CPO) Car Program
Drivers Drivers in the market for a used Volkswagen vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to learn...
A Buyer’s Guide to the 2012 Volkswagen Jetta TDI
The The 2012 Volkswagen Jetta TDI is a great choice for any car enthusiast who needs a practical but fun car for everyday driving. The Jetta TDI (which stands for turbocharged direct injection) has a whole host of features to...
Symptoms of a Bad or Failing Cylinder Head Temperature Sensor
Common signs include long cranking time, engine performance issues, and the Check Engine Light coming on.