Last night my car service engine soon light came on then ...


Last night my car service engine soon light came on then it started to shake very slightly well stop and also when i push on the gas it will take off slow i have already changed the fuel filter and done a oil change do u no what i...

Last night my car service engine soon light came on then it started to shake very slightly well stop and also when i push on the gas it will take off slow i have already changed the fuel filter and done a oil change do u no what it could possibly be Mechanic's Assistant: Is the fuel filter an external one, or is it inside the tank? External Mechanic's Assistant: What is the make/model/year of your car? 2005 Mercury Mountaineer Mechanic's Assistant: Are you fixing your Mountaineer yourself? What have you tried so far? 4.6 Yes Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I have chaged the break pads i have changed the oil and i have put a new fuel filter in

Automotive Expert
Hi! This is Anthony, a mechanic here on Just Answer. Sorry to see you're having trouble with your Mountaineer. With whom do I have the pleasure of chatting with today?

Hello my name is angel
Automotive Expert
Hi Angel! Have you had the vehicle scanned for a code or codes to see why the service engine soon light is on?

No i usually just no where the problem is coming fromI was going to do that this morning
Automotive Expert
Ok, I would definitely have it scanned for codes. If you don't have a scanner, your local Advanced Auto or Autozone can scan it for free. Without codes, it's really hard to say. Seems like you already took care of the typical things but it is still happening.

It stoped then i drove from tucson to cali and it started again last noght it never stalled it just feels like it want s toIs it possible for the spark plugs to make it do that
Automotive Expert
It is possible but it could also be a bad sensor, etc.

What sensor are u thinking
Automotive Expert
A crank sensor, cam sensor, fuel pressure sensor, etc. It could be a number of different sensors. The code will tell you exactly what the issue is.

Ok im bout to head to auto zone now am i able to text back with the code
Automotive Expert
Yes, just respond here like you've been doing.

Ok thank you
Automotive Expert
You're welcome.

What others are asking

What does the lamps on reminder light mean?
The lamps on reminder light is located on your instrument panel. This light helps you remember that your lights are on by illuminating anytime the lights are on.
How do I check the health of my seat belts?
It’s important to periodically inspect your seat belts, to make sure that they are in good health. A seat belt that is dying should be replaced immediately. To inspect the seat belts, extend them from the retractors and use your...
broke belt, replaced belt, now car will turn over but will not crank
Check the lower left side of the engine to check to see if the crankshaft speed sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) was damaged when the belt was broke or when the new one was replaced. It has two wires and a connector. The...
My steering wheel vibrates an i have a lost of power? Seems like engine is shaking
Hey there, thank you for asking about your 2005 Cadillac SRX. This is a known issue with the Cadillac SRX and is related to the steering wheel sensor. This sensor monitors the direction the wheels are turning. When it senses...
Where is thermostat located in 2006 DTS
The thermostat is located inside the water outlet housing fastened to the upper radiator hose. The thermostat is on the engine side of the hose. If you need some help with this repair, consider hiring one of our mobile experts...
spark plugs
Hello there, the spark plugs on your 2008 Acura RDX are replaced in regular service intervals. The service interval for your vehicle states the spark plugs should be replaced every 60,000 miles. The RDX is equipped with a maintenance minder...
When I set the alarm only the left side indicator lights flash, the right no light flash. the alarm work OK.
When the alarm was installed the alarm output wire for the lights need to be tied into a parking light circuit or turn signal circuit. Whom ever installed your unit hooked the light output wire to only the left turn...
Help my car wont move but will start it makes a grinding metal noise when trying to go in gear
Sounds like the input shaft on your transmission has broke when the vehicle went into gear. I recommend seeking out a professional, such as one from Your Mechanic, to help you diagnose your transmission noise (https://www.yourmechanic.com/services/grinding-noise-while-shifting-inspection).
2010 Volkswagen Beetle Base 5 Cyl 2.50L Preventive Maintenance Fuel Filter- MIA or Doesn't have one Purchased a used 2010 VW b
According to the listings, there are two engine codes - BPR and BPS. Those equipped with the BPS engine have the fuel filter located under the vehicle, just ahead of the passenger side rear wheel. The BPR equipped vehicles have...