I would like to join in a demolition derby
Responses
Chris (aka-Moose)
225 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
First off you need to decide what bracket you want to run in. Some places offer a compact class, 4 cylinder, 6 cylinder class, then a full size. You need to read up on the rules to see what is allowed and not allowed. Next is to find the new to you car to turn it into junk at the end of the night. Start off with the used car ads in hopes to find a car already running for cheap. If you come up with poor results then off to the junkyard to find a car. Do not worry about body damage since that is going to happen soon thereafter. Finding a good strong powertrain and drivetrain is the goal. Then do all the modifications allowed to improve the car for its intended purpose.
Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose
Customer
225 days ago
Hello my name is\*\*\*\*\* an I would like to join the demolition derby how can I get a car to joinHello I don't have much money on me to do the live phone call so can we talk somewhere else
Chris (aka-Moose)
225 days ago
Hello, Luke
Did you see the answer I provided 6 minutes ago?
Chris (aka-Moose)
225 days ago
Checking in with you. Please let me know if you liked my answer, or need more help.
Chris (aka-Moose)
225 days ago
It's been a couple of days since you replied. I am going to mark your question complete for now. Reply as needed.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Transmission Jerks
Have the drive shaft joints and rear axle pinion bearing checked to see if they have excessive play. Also, check to see if you have any broken motor or transmission mounts. This should help narrow down the problem for you....
I change oil and its now shows low oil pressure, could it be because oil its over limit?
You may have gotten a defective oil filter. I would not try and run the motor until you replace the filter again. Once it is replaced then start and run engine for a minute or less to see if it...
I have a 2012 Jeep Liberty that the abs and traction control light stay on as well as my Fuel guage stopped working as well as the
Hi there. Typically the ABS and fuel system are not related, so replacing the speed sensor might have been a part of the speedometer issue; but most likely not the other issues. Since multiple systems appear to be illuminated on...
Do I need a whole new ignition or just the ignition switch?
You will need to have the damage to the ignition lock cylinder housing checked to see if just the lock cylinder can be replaced if no damage to housing was done. You will need to have the door and trunk...
cost to replace the brake control and power module on 2006 prius
Hi there. Unfortunately, this is not a service our mobile mechanics offer; due to the complexity of the service and the need to program (which can only be done at an authorized dealership or Toyota repair facility).
tire pressure
Car manufacturers require that tire pressure be set to the required psi before the vehicle is driven on the roadway. Tire pressure has to be measured and set before the car has operated on the roadway because friction from operation...
Ben, I have two CNC machines in Redmond, WA that need flushing. Would you be able to help with this?
Hi - unfortunately, this is not a service YourMechanic.com offers at this time. Thanks for thinking of us though!
How do you replace the headlight bulbs in a 1990 Dodge Dynasty
You would need to open the hood and locate the back of the lights. Then with using a large pair of needle nose pliers, turn the lights counter clockwise and the lock to the bulbs will come off. Then pull...
What is the grinding sound coming from passenger side of engine
It sounds like this may be related to a couple of different possibilities. This could be a bad idler pulley bearing (https://www.yourmechanic.com/services/drive-belt-tensioner-replacement), which is a bearing inside an idler wheel that the serpentine belt rides on. When these bearings wear...
Browse other content
Services
Cities
I would like to join in a demolition derby Mechanic's Assistant: Okay, I'll connect you to the Mechanic to discuss this further with you. Before I do, is there anything else you want him to know? Not really an where would...
I would like to join in a demolition derby Mechanic's Assistant: Okay, I'll connect you to the Mechanic to discuss this further with you. Before I do, is there anything else you want him to know? Not really an where would I get the car from to join the demolition derby