Q: Car battery light came on and then lost all power

asked by on

No power in my jeep would it be the battery

My car has 11000 miles.
My car has an automatic transmission.

It sounds like you may have a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator charges the battery while the engine runs by generating amperage and recharging the battery while the engine turns the alternator pulley. The voltage regulator is a unit that regulates the charging of the battery by the alternator and maintaining a certain amperage while the engine runs. When the alternator is not working properly, this may result in the battery quickly losing charge and the car losing all power. You may also notice a whining sound as a result of the bearings inside the alternator begin to fail. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your charging system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car battery light came on and then lost all power

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I just got new tires put on my vehicle my traction control light came on can this be related ?

This could happen either because the wrong size tires were installed or that a wheel speed sensor may have been damaged during the process of installing the tires. I would check to make sure all of your tire sizes are...

Q: Driveshaft assembly

Hello, thanks for writing in. The driveshaft assembly is composed of the driveshaft, U-joints and snap rings. Both ends of the driveshaft connect to the output shaft and differential via yokes. If you would like help with this replacement, consider...

Q: Binding popping noise when decelerating without applying the brakes.

Hi there. To test the universal joints, press up on the drive shaft near the joint and see if the caps move around. Take the drive shaft and turn it back and forth and see if the drive shaft moves...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...