Q: Air conditioner blowing hot air on drivers side

asked by on

Air conditioner blowing hot air on drivers side.
My car has an automatic transmission.

If the air conditioning system is on and vent temperatures are as expected for a/c at certain outlets (typically outlets would measure around 35-40 degrees below outdoor ambient) yet the air blowing from other outlets is "warmer" or indeed "hot", check the position of the heater control valve. If the heater control valve is open (when it’s not supposed to be) AND there are malfunctioning, mispositioned or stuck blend doors, that would explain the hot air. If you want this problem resolved by a certified Mechanic, dispatched by YourMechanic right to your location, please request an a/c and heating systems diagnostic. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Air conditioner blowing hot air on drivers side

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car loses power when coming to a stop. Radio resets then loses power. Replaced battery and alternator. No code given when this occurs.

Hello and thank you for contacting YourMechanic. Check for any loose ground wires under the dash. There also could be a loose ground wire to the computer causing it to temporary shut down and make everything flicker. Check the ground...

Q: P0843

Trouble code P0843 pops up quite frequently on vehicles such as your Honda CR-V. The 2nd clutch transmission pressure switch is installed in the hydraulic pressure circuit to the 2nd clutch. The Powertrain Control Module (PCM) uses this information to...

Q: i dont know the size of the heater core is it 5/8 or a 2 inch

The 5/8 inch dimension versus the 2 inch dimension simply refers to the "thickness" of the core body. If you have your core out, or can wait to access it, just simply look and see if the core is very...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...