Skip the auto shop - Our mechanics make house calls

Q: Jerking reaction when accelerating

asked by on

When drive suddenly car slow down while you accelerate after 20or30seconds car accelerate fast

My car has 62000 miles.
My car has an automatic transmission.

This may be a sign of a dirty or failing mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected into the motor. When this is dirty or faulty, this causes an imbalanced air/fuel load to be supplied to the motor which results in an over fueling or under fueling situation depending on the conditions. This type of inconsistent fuel supply to the motor may cause a hesitation, loss of power, a jerking reaction, potentially a bit of black exhaust smoke and typically a strong smell of fuel when this sensor is malfunctioning. When this is not working properly, you may also notice a strong smell of fuel. I would suggest having a professional from Your Mechanic come to your home to diagnose your mass air flow sensor.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Gearbox problems

This may suggest the transmission synchros may be wearing out. Your transmission has small gear synchronizer rings that help to move the transmission in and out of the various gears. When these begin to wear out, you may notice it...

Q: Hit a speed bump when driving and my car began stalling

When you hit the bump, it could be that the engine shifted enough to pull loose the connection at the Mass Air Flow meter. Look under the hood for a large rubber hose connected to the throttle body and be...

Q: Steering wheel jerking

Hello. If there is a consistent jerk occurring, then it is typically a spool valve problem in the rack and pinion. This would require replacement of the entire rack and pinion assembly. It can also be caused by a failing...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...