Popular questions

Hey there. This can be caused by a number of things such as low coolant levels, a faulty thermostat, or a failing coolant fan switch. As you may know, the coolant fan switch helps to maintain the proper coolant temperature...

Sounds like you have got some serious drive line issues, is your transmission automatic or standard? Some of the problems you could be having could be burned clutch, seized pilot bearing, the final drive being locked up, or a problem...

The boost pressure, and the intake charge temperature sensor in the turbo boost circuit are thought to be the most common origins of "limp mode" problems. The connectors on these 2 sensors become slightly corroded with time, miles and weather...

A lot depends on *why *the serpentine belt broke. If the belt broke after 120,000 miles simply due to age, that's fine, but if it broke because one of the rotating elements - the tensioner, pulleys, alternator pulley, and so...

Your brake system (which includes ABS) has check valves and accumulator chambers between the master cylinder and the calipers. It will be necessary to use a pressure bleeder to overcome these "restrictions." Gravity flow or a vacuum bleeder at the...

Your 2015 Kia may use a brand new dual cutch transmission, which works differently than a traditional automatic transmission. That sound, combined with the conditions under which you hear it, makes me think you have a problem with your flywheel....

They may cause some sag in the rear suspension but if you word the inside of tires, then you have worn bushings on the lower control arms and possible weak springs and struts. Have the entire suspension inspected and have...

You should have a mobile mechanic like one from YourMechanic come to you so you do not have to worry about getting stranded on the road with a dead system. Have the engine light on inspected. by the mechanic to...

Hi, check the rim and see if it is damaged at all. You may have hit the rim and the body of the car will be fine. The wheel however is misaligned, especially if the steering wheel is wobbling a...

Hello. If unplugging the MAF sensor causes the engine to run better then there is a secondary air leak into the engine. This means that there is a vacuum leak from someplace. Most of the time on this engine it...

Have you checked the actual fuel pressure in the system? If the fuel pressure is too low from a weak fuel pump, there will not be enough volume of fuel traveling to the engine for proper performance. Consider hiring an...

The problem of not getting any of the instruments to come on when it starts then you will need to have the ignition switch checked to see if it is sticking or not sending power to cluster.

Though the information provided on your Ford Taurus is a bit limited, I can make a first suggestion that will hopefully lead us in the right direction. While attempting to shift out of park, carefully feel the gear selector as...

This is a common sign of a failing starter relay. This is a unit that sits near the starter and directs power from the battery to the starter allowing it to engage the flywheel when you turn the key. When...

I would start with checking the O2 sensor. This is what relays exhaust gas changes to the vehicle's computer. When this sensor is not working correctly, incorrect or misdiagnosed air/fuel mixtures are relayed to the vehicle's computer causing incorrect changes...

Hello. If this issue has occurred ever since the work was done then I would suspect that there is something that was not installed correctly. If you are getting noise also then the ABS wheel speed sensor may be contacting...

Hello there, many faults can cause your 2004 Honda Accord to not shift properly. The most common is low transmission fluid, shift linkage, torque converter, shift solenoid, or transmission mechanical faults. The first step a technician will take is to...

The data you are seeking, documenting relative frequency of failure of all the various powertrain components, is maintained by the scan tool manufacturers examples of which are Actron and Innova. These companies, as well as other scan tool makers, compile...

Hi there. Since the Check Engine Light is on then I would typically need to scan the computer for codes to see what the computer is seeing as a fault. This is the best way to start the diagnostic on...

The stabilitrak and traction control systems may become inactive if the engine light is on. The code for a cylinder misfire on cylinder #7 may be due to the engine oil system containing sludge from improper oil change intervals. This...

Hello. I think you may have a problem with the cold start valve not dumping the proper amount of fuel to allow the car to start and remain running on a cold start. The distributor should be checked as well...

Typically a bad crank position sensor will prevent your vehicle from starting. Your rough idle could be due to a vacuum leak or possibly a dirty injector, or maybe even an idle air control valve or throttle body that needs...