Skip the auto shop - Our mechanics make house calls

Q: Window out of track

asked by on

The driver's side window is out of it's tracks.

A: Hi there. When the window regulator breaks ...

Hi there. When the window regulator breaks the window itself comes off of the track. If the regulator is bad then the regulator and motor need to be replaced as an assembly. I usually diagnose this by removing the door panel to see why the window is not on the track. I can then determine if it is the regulator by seeing if the window came out of the regulator or if the regulator shifted and failed. If you need to have this repaired, consider YourMechanic, as a certified mechanic can come to your home or office to inspect your window and replace your window motor / regulator assembly if necessary.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: When my car is at idle in park or neutral the Intake Air Control Valve fluctuates, causing the RPM's to do the same.

Hi there. It sounds as though the idle air control valve (IAC) may be sticking. It is not uncommon for carbon to build up in the valve, the computer will try to overcompensate to correct the slow reaction inside the...

Q: Lighting bolt came on after changing out alternator, what may that mean?

Although the two alternators may look the same and fit the same your vehicle was equipped with the less amperage alternator. The alternator is controlled by the computer and may not charge correctly if the wrong one. Have the system...

Q: What does the malfunction indicator Warning Light mean?

The malfunction indicator Warning Light is on your instrument cluster. It illuminates when the On-Board Diagnostics-Second Generation (OBD II) system detects an issue. The OBD II system monitors your vehicle’s emissions. When the malfunction indicator Warning Light is illuminated, it...

Related articles

P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.