Skip the auto shop - Our mechanics make house calls

Q: Where is the fuel filter located ?

asked by on

Where is the fuel filter located ?

My car has 58800 miles.
My car has a manual transmission.

A: The fuel filter on this vehicle is located ...

The fuel filter on this vehicle is located on the inside of the frame under a protective cover in the left rear of the vehicle just in front of the rear axle shock mounting location on the frame.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Engine not getting any spark

Hey there. This is a common issue. I would need to know what repairs were performed originally to fully answer this question. There are quite a few things that would cause a no spark condition. If the car is in...

Q: No pressure after the FPR

The fuel pressure regulator will regulate the fuel pressure by allowing fuel to return back to the fuel tank if the pressure gets too high. If the fuel pump never produces enough pressure and volume of fuel to run the...

Q: Jeep is not running properly

Hello, There are a number of things that may cause the car to hesitate when accelerating as you describe, such as low fuel pressure, a dirty or faulty mass air flow sensor, clogged or dirty fuel injectors, a faulty throttle...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...