Q: What is the price range to reset and/or reprogram the computer?

The amount of amperage it takes to start a car is high and if the jumper cables are any smaller than 10 or 8 gauge they will heat up thats pretty normal. If the car isn't cranking at all I...

There are many vehicles today where it is normal for the cooling fan to run for a few minutes after the engine has been turned off. It is especially long running and will be more noticeable on really hot days...

It would appear that your vehicle is experiencing a considerable coolant leak. As coolant leaks can lead to overheating, and potential engine damage, I would recommend having a professional technician, such as one from YourMechanic, determine the exact location of...

Hi there: Changing the radiator, hoses and thermostat does not typically negatively impact fuel economy (https://www.yourmechanic.com/services/car-is-getting-worse-gas-mileage-inspection) or AC issues. However, the installation of those items might, especially if the serpentine belt was installed incorrectly. However, with Hybrid models, the two...

Unfortunately, this is not a service that YourMechanic offers at this time. This task is best handled by a collision repair (https://www.yourmechanic.com/article/what-to-do-after-a-major-car-accident) estimator at a reputable paint and body shop. They are trained to evaluate visible and not-so-visible damage, and...

In the event that diagnostic trouble codes have been set by the PCM, downloading those codes will greatly narrow the possibilities that you have to consider. No spark could be due to bad grounds (possibly in the plenum area; see...

Anytime you have mix matched computers and engines you will run into different issues that may not be able to be fixed. This problem sounds like the ignition timing is not advanced enough. Try to get the timing adjusted more...

Hi there. There are typically three things you can do to resolve this issue. First, you can have a professional mobile mechanic complete an ignition lock cylinder replacement (https://www.yourmechanic.com/article/how-to-replace-an-ignition-lock-cylinder-by-timothy-charlet). Second, you can contact your local Honda dealership to see if...

Hi Dan. Thanks for reaching out today. Brake fluid can indeed cause communication errors with ABS sensors, so that might be (one) cause of this issue. However, it's also possible that the battery has gone dead (by coincidence as you...