Q: What does the Engine Oil Low – Add Oil message mean?

asked by on

What does the Engine Oil Low – Add Oil message mean?

The Engine Oil Low – Add Oil message will appear on your driver information center (DIC) when the oil level is too low in your engine. When more oil is added, this alert will no longer be displayed on the DIC.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the Engine Oil Low – Add Oil message mean?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: How do I use remote vehicle start?

Your remote keyless entry (RKE) transmitter can be used to turn on your vehicle before you are in the car. Turning on your vehicle with remote vehicle start is easy: 1. Make sure that you are within range of your...

Q: Truck idled, ran rough, fluid streaming from motor

Hello there, thank you for asking about your car. It's highly unlikely that brake fluid entered the combustion chamber. The noise also would not be caused by using synthetic oil instead of conventional oil. As for the oil pressure, I'm...

Q: Check engine light and P1345 code

I'm thinking that they may have sold you a V6 distributor. Remove the rotor and look at the top of the vane cup for a "6" or an "8". It there is a 6, it's a V6 distributor and won't...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.