Q: Trunk not latching

asked by on

The trunk won't close. It opens all the way up and closes, but doesn't latch. If I close it manually, it only pops back up again.

It sounds to me like the latching mechanism isn’t doing its job properly, probably requiring replacement. I would have a certified mechanic, such as one from YourMechanic, verify the issue and replace the latch if necessary.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Trunk not latching

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the lift gate open Warning Light mean?

The lift gate open Warning Light is located on the instrument panel. This light illuminates when the trunk is not properly closed. When you close the trunk, the light will turn off.

Q: Steering wheel hard to turn in 2008 Mercedes-Benz ML350

In many cases, loss of steering effort can be traced back to a malfunction in the power steering system. The belt, if equipped, may have broken and stopped the function of the system pump. If electronic, the power assist motor...

Q: Sometimes car goes into limp mode a bit of smoke from exhaust

Hi there. Sometimes, dirty or clogged fuel injectors, throttle body or EGR valve, and mass air flow sensors can cause lack of acceleration and smaller levels of smoke from exhaust. However, there are also ignition issues that could cause this...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...