Q: Truck won't crank

asked by on

The wiring from the ignition key to the starter crank position will not engage the binding on the starter to crank the truck.

From your description, it sounds as though your ignition switch is faulty. If there is power on the wire when trying to crank, it could be a faulty starter. You could ask for help from a certified mechanic at YourMechanic to diagnose and repair your ignition issue.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Truck won't crank

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What transmission fits an 1984 delta 88 Oldsmobile diesel?

Hello - this model was built with either the TurboHydramatic 200C or 200-4R transmission.

Q: What’s the range on the Intelligent Key?

Your Intelligent Key allows you to enter and exit the car, automatically unlock doors, get into the trunk and more. However, it has a limited range. In order to use the key, you need to be standing about two and...

Q: 2015 Ford Edge charging system light come on ?

There may be a fault with the alternator and/or the battery. You can use a voltmeter to check charging system output at the battery posts. Output should be in the neighborhood of 14.5 volts but the actual specification will depend...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...