Q: Q: Transmission leak

asked by on

The transmission is leaking. It might be the gasket.

The pan is the most common leak area on these transmissions, but it would need to be inspected to see if the case, or filter, is the cause of the leak. If you are low on fluid, I recommend that you use only the recommended fluids to keep the transmission full until you get the transmission leak diagnosed and fixed by a certified mechanic.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Transmission leak

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2009 Nissan Murano has the P0420 trouble code. It says the normal bank 1 issue, but now it says short to VBAT. What is that and how to fix it?

Hi there. From the description you have provided, for your vehicle's P0420 trouble code. I suspect the O2 (Oxygen) sensor you replaced has created an additional concern for your vehicle. Either, the O2 sensor is incorrect by application or is...

Q: Car not running

It sounds like you have at least two issues, the check engine light has come on accompanied by loss of power and you have an antifreeze leak. The source of antifreeze leaks can be pinpointed by simple pressure testing of...

Q: Q: Car overheating

There are many gaskets on your car; there is no way for me to tell which gasket the coolant is shooting out of without directly inspecting your car. I can say that it is not common for a head...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...