Q: Q: Abs light randomly coming on.

asked by on

The traction control light stays on while the engine light flickers it says service stability trak.

My car has 112845 miles.
My car has an automatic transmission.

The traction control system monitors the steering stability of the vehicle and engages when loss of traction has been detected. This is done by the use of electronic sensors that communicate with the Power Train Control Module (PCM) regarding steering performance and stability in adverse weather conditions. The traction control system works by reducing engine speed and determining which wheel to apply brake pressure to in order to prevent the vehicle from sliding. The anti-lock braking system and the traction control system work together to maintain the stability of the vehicle. The computer uses this information received from electronic sensors regarding the rotational speed of each wheel, the horizontal motion of the vehicle, and the vertical motion of the vehicle to determine how to direct the traction control system or the anti-lock braking system to best control the vehicle when needed. When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack. In some cases, the traction control system may simply need to be reprogrammed. I would recommend having a professional from YourMechanic come to your location to properly diagnose your traction control system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Abs light randomly coming on.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car quietly died while driving

This is a common symptom of a failing crankshaft position sensor and as the code indicates, this means the sensor needs to be replaced. A crankshaft position sensor is an electronic device used to monitor the position or rotational speed...

Q: Why does my temperature gauge go into the red when using the heater in my 1992 Chevrolet Lumina

Hello. There area lot of things that can cause this. The first thing I would check is the thermostat. If the thermostat is not opening right then this will occur. If the thermostat is fine then it may have a...

Q: How do I use the flash-to-pass high-beams?

The flash-to-pass high-beams are a way to flash your high-beams once. To use the flash-to-pass high-beams, pull the turn signal lever towards you, and then release it. The lever will return to its normal position, and the vehicle will flash...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...