I8 saturn vue over 200,000 miles abs light on and vehicle...


I8 saturn vue over 200,000 miles abs light on and vehicle will not drive fwd or backwards if I touch neg and pos terminals together and let it sit for a few min I can restart and drive only long enough until abs light comes on and...

I8 saturn vue over 200,000 miles abs light on and vehicle will not drive fwd or backwards if I touch neg and pos terminals together and let it sit for a few min I can restart and drive only long enough until abs light comes on and it makes a whining noise, I've checked fluid levels and reset computer but still continues Mechanic's Assistant: Is it just the ABS light? Or is the brake system warning light on, too? Just abs Mechanic's Assistant: What year is your Vue? 08 Mechanic's Assistant: Are you fixing your Vue yourself? What have you tried so far? Yes and tried resetting computer Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Makes a whining noise

Automotive Expert
My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Thank you for taking the time to let us help you out with this problem and hopefully we can sort it out quickly. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. Connecting a scan tool to the ABS system will be necessary to see why the warning light is on because there are many different components in the system that could be faulty. It could be a sensor problem, wiring issue, module fault, ABS pump malfunction, brake problem, etc. Scanning the system will produce a trouble code that will identify what specific component is having a problem. The trouble code will allow a diagnostic of that specific component failure. If you can have the vehicle scanned and give me this code, then I can pinpoint a specific problem to repair. I would also check the transmission fluid level and do a pressure test on the transmission. It sounds like the torque converter may be faulty. My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. If I’m not online at the time, I will respond ASAP when I get back. You can ask unlimited questions to any of the 12,000 Experts! From doctors, lawyers, tech support, contractors, tutors, auto and boat mechanics, appliance technicians, veterinarians, accountants, appraisers, psychologists, engineers, heavy machinery masters, dream interpreters, and more, we've got you covered, 24/7.

I have an obII scan tool will that work
Automotive Expert
If it can read the ABS module then yes it will work.

It reads engine and transmission codes I believe
Automotive Expert
You can check to see if you have any engine or transmission codes also but you'll also need to scan the ABS module.

What others are asking

How do I set the security alarm?
The security alarm is a key safety feature that helps keep your car from being stolen. When someone enters your car without a key or the remote transmitter, the security alarm will activate, and the horn will honk and the...
Missing fuses
Hello. There are fuses in your fuse box that control the car’s ability to start. The best thing to do would be to put the fuses back and see if the car starts. If it doesn’t, it could be that...
When it's hot out my car won't start, any ideas?
A couple of things come to mind. I would first ask these questions: Is this a no crank or a no start? I will address both scenarios below. A no crank is when the motor doesn't turn when you turn...
The car starts only with Easy Spray
Hi there. Thanks for writing in about your 2010 Ford Transit Connect. It sounds like there may not be a crank signal occurring at the normal cranking speed. If there is not, then the engine will not start. If adding...
My truck uses a lot of gas
Hey there. There are many versions of your vehicle, so the mileage varies between 17 to 20 (combined city/highway) depending on the version. See fueleconomy.gov (https://www.fueleconomy.gov) to determine what the rated mileage is for your version of the vehicle. The...
My Check Engine Light is on, and the code points to the thermostat. Is it safe to drive my car with this issue?
If you can write back in with the exact Diagnostic Trouble Code (DTC) that Autozone downloaded for you, we can give you a more precise answer. For want of that detail, if you are referring to the "engine cooling system...
I'm trying to find out what is wrong with my car
Based on the symptoms you described it seems as if your fan clutch (https://www.yourmechanic.com/services/fan-clutch-replacement) or water pump (https://www.yourmechanic.com/services/water-pump-replacement) may be having an issue. I would recommend having your cooling system pressure tested by a qualified professional to determine the exact...
i've been told it's very difficult to ge to the spark plugs on a Scion FRS (boxer engine). Is it possible to replace at my home
I am not 100 percent sure that our mobile mechanics are able to provide this service on your Scion. In order to receive a quote, you need to request a spark plug replacement service by clicking this link (https://www.yourmechanic.com/services/spark-plugs-replacement). Once...
2006 BMW oil filter gasket keeps breaking and oil leaks from oil filter. Oil leaks only after starting car in morning. PCV valve?
Hi There, It sounds like you may need to replace the oil cap o-ring. If you haven't done this before there are two O-rings to replace; a small green one on the base of the filter cap stem and the...