Q: Power steering needing fluid

asked by on

And what's the difference between that and an enable hose

My car has 147000 miles.
My car has an automatic transmission.

Hello, thanks for your question. In order to answer your question I would need more detailed information. Power steering systems use hoses, a pressure hose, and a return hose. The pressure hose goes from the pump to the power steering rack or gear, and the return hose, which returns the fluid from the rack or gear to the pump.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Power steering needing fluid

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Spark plugs/Coil plugs wont spark and car will no longer start because of this.

The mention of the camshaft position code and the car's mileage make me think of a timing belt problem. If you can see the camshaft you might want to check and see if it is turning while the car cranks....

Q: Pontiac Grand Prix shaking at 30 mph

If there is a broken piece on the rim it will cause the rim to be out of balance and shake when the car picks up speed. I would definitely get the rim fixed and re-balance and see if that...

Q: 1985 mercury marquis v6 3.8 the seal on the rear end is leaking were the drive shaft connects to axle and it needs repaired.

Hi there. Remove the wheels from the vehicle with the vehicle on jack stands and remove all of the brakes. Then behind the brake spider plate, there is 4 bolts that is holding the axle shaft in place. Remove the...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...