Q: P0741 OBD code

asked by on

P0741 OBD code

My car has 80000 miles.
My car has an automatic transmission.

Hello, thanks for writing in about your Volkswagen Passat. Trouble code P0741 indicates: Torque Converter Clutch Circuit Performance or Stuck Off.

If you need help with getting this fixed, consider YourMechanic, as one of our mobile technicians can come to your home or office to diagnose your Check Engine Light and help you fix it accordingly.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. P0741 OBD code

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car won't go into gear. 2002 Audi A4 Quattro

Hi there - Your symptoms describe the behavior to expect when your clutch hydraulics go out (clutch master and clutch slave cylinders). Check your clutch fluid level - it may be low. If the fluid level is low, this usually...

Q: P0301 and P0411 codes on vw Passat 2003 1.8lt turbo

Fault code P0301 is a misfire on cylinder # 1 and P0411 is a fault for Incorrect Secondary Air Injection. Trouble code P0301 is most likely due to a faulty ignition coil. To verify before purchasing one, try swapping say...

Q: 2004.5 Volvo S40 T5 alternator

These vehicles are known to have issues with aftermarket alternators since they are computer controlled charge circuits and aftermarket alternators do not always work correctly and only dealer alternators will work correctly.

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.