Q: Q: Oil in coolant.

asked by on

Oil in coolant in radiator on my Hummer.

Oil in your coolant is a bad sign. This usually indicates a leaking head gasket or cracked head. A cooling system pressure test and block test will be able to determine this. I suggest having a qualified technician, such as one from YourMechanic, inspect and repair your Hummer.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Oil in coolant.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Check Engine code p0758

A P0758 code indicates a problem with the vehicle's shift solenoid, specifically shift solenoid B. If this light has come on, then the vehicle may be experiencing poor performance, or unusual shifting. As this component is located on the underside...

Q: I have a code P0171 and needs repairs.

Hi there. The code P0171 is caused by the engine getting too hot and not having enough fuel to burn. Check the fuel injectors, fuel pressure, and the fuel pump to see if they are working properly. Since the vehicle...

Q: Check engine light was on and now temperature gauge go hot ? i replace the thermostat but still go hot .help ?

It sounds like you may have a number of issues going on. Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, a clogged radiator or a failing coolant fan switch. As you...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...