Skip the auto shop - Our mechanics make house calls

Q: Oil filter hard to get off

asked by on

The oil filter is stuck on the engine.

A: I have seen this before. It usually happens...

I have seen this before. It usually happens because the filter is over tightened when installed. Unfortunately the only was to get it off is to unscrew it. Contact a mechanic such as one from Your Mechanic, they will have the proper oil filter wrench to remove it, change your oil and install a new filter.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What can cause an oil filter seal to blow?

The oil filter seal (to the block) could fail if the old seal was left in place and the new filter was installed over the old seal. In that case, the old seal will often dislodge and the oil will...

Q: Car runs til I hit breaks without a battery

It is possible that you removed the jumper cables too soon. Many times batteries can be so discharged that they can die even after starting the vehicle. I would recommend jumpstarting it again and keeping the cables on for a...

Q: Battery keeps dying, TRAC ight on

Hello. It is possible that the alternator is not charging properly, which could cause the battery to be overworked and die out. If the interior lights are being left on, or if the radio is pulling power when it should...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...