Q: Q: My car can crank but won't start

asked by on

Yesterday I drove my car without any problems later I tried cranking my car and it wouldn't start. The lights and everything works it just won't start
My car has an automatic transmission.

Hi There, This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination of both. Things like ignition coils, crankshaft position sensor, spark plugs, spark plug wires or ignition module are all components that help to create spark and control ignition timing which may cause the motor to not produce spark or the correct timing needed to ignite the fuel in the motor.

In the case of a fuel delivery problem, this may be related to low fuel pressure, faulty or dirty fuel injectors, a faulty or dirty idle air control valve (this relays information about air intake to the computer which makes fuel adjustments), or potentially a faulty fuel pressure regulator or fuel pump. Fuel delivery problems will typically not allow the proper amount of fuel to be delivered to the cylinders which results in a lean fuel condition which can cause backfiring or simply cause the motor not to start as a result of fuel starvation. In some cases too much fuel may be supplied to the motor causing too much fuel to be introduced to the motor faster than what it can burn it. This results in the motor being flooded with too much fuel also causing it not to run properly. Any of the above possibilities can create an imbalance in the proper air/fuel ratio as well which will cause the motor to run very rough or not at all. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: My car can crank but won't start

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: idler pulley

I think you mean the a/c compressor is seized and not the condenser. You will need to get an a/c compressor bypass kit and the compressor can then be removed and a pulley in its place. The problem is these...

Q: Car is losing coolant

Hi, it is possible for leaks to occur around the cylinders so that coolant gets into the combustion chamber and burns with the fuel and air. Liquid doesn't compress at all, so if too much gets into the cylinders, you...

Q: Engine won't crank and seems like it is frozen.

If the engine is seized, it certainly will not crank. This can be checked by attaching a breaker bar to the crank pulley bolt and trying to turn the engine over by hand. A qualified technician from YourMechanic can perform...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...