Please clarify one part to a 5/2 answer (below). On the ’...
Responses
Chris (aka- Moose)
235 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
- What are you mounting on the kick panel?
- How long are your screws?
- Have you removed the panel to see what is behind where the screws will be?
Chris (aka- Moose)
235 days ago
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like in my answer. I hope what I can provide does help.
As long as the screw do not pierce any module, electrical components, or wiring then you should be fine.
Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose
Customer
235 days ago
2021 Kia Soul EX) Chris, excuse my delayed response. I sure enjoyed Tennessee, when we flew into Nashville and drove to the Talladega race. As for screwing versus gluing a (less COF) plate onto the existing kick panel, 3ea. 1/4-20 x 50-.75” lg. counter-sunk screws (.25-.50” into the metal) would hold the new cover, but I want to know if there are any electrical/lube lines directly under that metal area. The Michigan dealer’s service dept. hesitantly said no. I’d like a schematic or someone who has seen inside the cavity area. No, I’m unable to remove the kick panel and as my dim photo shows, all seems molded into the factory flooring. The ’17-18 year Kia’s sold screw-on into metal surface plates, but again, I’m double checking for the ‘21. My good neighbor is making the plate to help with sluggish left foot (disability), but I told him to wait for more info. I also talked to a Kia dealer parts/service dept. in Denver, who seemed clueless. Thank you for any info/source direction such as a schematic. Diane in Denver
Chris (aka- Moose)
235 days ago
Diane, what are you wanting to add to the left footrest on the floor?
Customer
235 days ago
Chris, just a .25" thk aluminum plate.
Chris (aka- Moose)
235 days ago
If you use short screws, then you should be fine.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How Do I Make Homemade Washer Fluid?
There are numerous ways to make homemade washer fluid (https://www.yourmechanic.com/article/how-to-make-your-own-windshield-wiper-fluid-by-samson-dikeman). The properties of each will vary based on the material used. Which method you choose is dependant on what you have available around the house and what you value. There...
What should I know about starting the engine in cold weather with E85?
If your vehicle is designed to be a flexible fuel vehicle (not all are), you may encounter some problems starting the engine in very cold weather. This is particularly true if you’re running E85. Here’s what you should know: Crank...
Car makes grinding noise
Have an experienced technician with an automotive stethoscope inspect the vehicle. Some noises can be difficult to diagnose and the stethoscope will lead the tech to the root of the problem. The cooling fan can break and make noise as...
Not sure if I messed up my engine
Hello Sir, From the symptoms you describe it would not appear to me that you have messed up your engine. Usually a Check Engine Light (https://www.yourmechanic.com/article/the-check-engine-light-demystified) that is flashing means that there is a problem with the vehicle that is...
The P0010 error keep coming up and my car keeps jumping, and turning itself off and on while I drive sometimes.
Hello, thanks for writing in. If you took your vehicle in for repairs, and it was returned with a check engine light then I would immediately return to the shop and have them take care of the issue. If the...
Engine turns over good but won't start what might be the problem? It misfired one time and hasn't started since.
Your engine requires spark, air, and fuel to start and run properly. Air is almost always present so that leaves spark and fuel. Depending on the vehicle, if a crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is faulty, the engine control unit may not...
EGR code and Cylinder number 4 misfire detected.
Hi there. The Exhaust Gas Recirculation (EGR) valve may be the wrong one or the cheap design could be not designed for the emissions requirements for U.S. standards. If the EGR is pulling from cylinder number 4 and after replacing...
Can a Catalytic converter break up little pieces and ruin your engine
It is not possible for broken off pieces from a catalytic converter to get into your car's engine and damage it. However, if your vehicle's catalytic converter is damaged, including breakage or melting of the internal honeycomb substrate that contains...
EPS issue on 2002 Honda S2000
EPS systems will communicate with a professional scan tool. Inasmuch as all of the "faults" you refer to are possible, the fastest way to resolve this is to simply download the trouble codes that have set and/or use a real...
Browse other content
Estimates
Maintenance
Please clarify one part to a 5/2 answer (below). On the ’17-’18 Kia Soul it was okay to screw into the footrest metal under the plastic, but on the ’21 I’m not certain what, if anything, is in that footrest cavity to where drillin...
Please clarify one part to a 5/2 answer (below). On the ’17-’18 Kia Soul it was okay to screw into the footrest metal under the plastic, but on the ’21 I’m not certain what, if anything, is in that footrest cavity to where drilling 4ea. 1/4-20 screws .38-50” deep into the metal is okay. I appreciate your expertise! Thank you.Hello and welcome to just answer. My name is \*\*\*\*\* \*\*\*\*\* I will assist you today. I am sorry you are having this issue, but hopefully I can help. Yes you can drill the foot rest and screw on a cover on the 2021. It is just plastic and will be fine drilling into it.