Q: Installed cold-air intake on 2006 dodge ram 2500 diesel and now having issues when driving trying to shift up to 3rd gear.

asked by on October 29, 2017

I did notice that a coolant line had come off radiator, once I reapplied it i was still having issues. Then when clean MAF Sensor, I noticed the wire harness to sensor had been a bit burnt, possibly due to coolant being sprayed at it. Is that the issue or is something else?

My car has 123000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What kind of fuel should I use?
You should use “regular” unleaded fuel with an octane rating of 87.
Clock not working
The clock fuse would need to be checked first. If that is okay, then the clock should be checked to make sure that it has a proper supply of power and grounds. If that is okay, then a replacement clock...
Recommended oil to use on a turbo engine vs. a non-turbo one
Yes it really does. Because turbos spin hundreds of thousands of revolutions and they need really good lubrication. They need a little heavier oil (https://www.yourmechanic.com/article/why-are-5w-30-and-5w-20-oils-so-common). They need the 30 vs. the 20 and you don't want to mess with the...
Wheel Hub Assembly
Hi there. Every tire and wheel on your vehicle is secured to the wheel hub assembly (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-damaged-wheel-bearing). If the wheel bearings or the hub itself are damaged, then it can break, causing the wheel and tires to literally fall off...
Engine light p0171
As you may know, his code is related to a lean fuel condition which is normally related to many of the items you have listed. I would recommend checking the injector pulses to be sure they are providing enough fuel...
Car cranks but won't start.
Hello. I would need to know what kind of Ford this is to know for sure what may be going on. Most of the time on these older Ford models the issue is fuel-related. It may be a result of...
Exhaust smell inside the cabin
Hello. Smelling exhaust fumes inside of the vehicle (https://www.yourmechanic.com/services/exhaust-fume-odor-in-car-inspection) can be hazardous to your health, and is a problem that should be taken care of as soon as possible. Typically the air from around the engine and front of the...
Ran out of gas put gas in it but not getting to carburetor maybe it's the fuel filter
You should first try to replace the fuel filter and then with fuel line disconnected test to see if the fuel pump is pumping close to 5 psi of fuel pressure and is pumping fuel. When the vehicle ran out...
my car engine is smoking. can I safely drive it to dealer? (10 miles)
It depends on the source of the smoke. If the vehicle is overheating, any use could quickly ruin the engine. If the smoke is from engine oil dripping onto a hot exhaust manifold, you could end up with an engine...

Related articles

How Long Does a Fuel Pump Last?
With With all of the different components that allow your car’s fuel system to function, it can become very hard to keep up with them all. Having malfunctioning components in your fuel system can lead to a variety of issues...
P0300 OBD-II Trouble Code: Random/Multiple Cylinder Misfire Detected
P0300 code definition Random/multiple cylinder misfire detected What the P0300 code means Most vehicles will have 4-6 cylinders. Each cylinder will fire...
P3465 OBD-11 Trouble Code: Cylinder 9 Deactivation/Intake Valve Control Circuit/Open
What What the P3465 code means This code indicates that there is a problem with the exhaust valve on cylinder number 9. When your vehicle’s powertrain control module (PCM) recognizes that the measured values of the mass airflow sensor, the...