Q: Inspector for faulty vacuum hose

asked by on December 10, 2017

Code P0300 indicates chat were too Manuel dándome cylinder misfires within a predetermined periódicas oficiales time. Inspect for faulty vacuum hose. Cuánto me costaría este arreglo

My car has 141820 miles.
My car has an automatic transmission.

A code of P0300 can be caused by vacuum leak in the PCV system or in the intake manifold gasket. It can also be caused by excessive water or alcohol in the fuel. Try adding dry gas or Heat to fuel to help disperse any water in fuel and have engine checked for vacuum leaks.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car won't go
If the vehicle is in drive and it will not move, then it may be a serious transmission failure. This is not uncommon on this vehicle. If the shifter feels a little looser than usual, then most of the time...
Car won't stay crank
I would need more information in order to give you a precise answer. It is impossible to determine what is wrong with your vehicle with just this description, but there are a few possibilities that I'll list. The starting issue...
My car isn't changing gears properly. 2006 Chevrolet Impala
Hello. I would check the transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) and condition on the dipstick. If it is low and/or has a burnt smell (transmission fluid should be a reddish color), then you may have a failed transmission. Changing the fluid...
Vehicle stalls both at idle and while moving without triggering any check engine codes.
This is usually caused by a bad connection from a main power source. On your Dakota, this would be a fusible link or fuse coming directly from the battery. The fuses will be in the power distribution center under the...
My car is making a whining/chirping noise.
Hi there: Sometimes this chirping sound when the defrost is on is caused by leafs or other debris that gets stuck underneath the dashboard or the vents near the front windshield. In some cases, it's the blower motor or vent...
No power to half my fuses. Car was crunk
If you request an electrical system diagnostic (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection), a certified Mechanic will use the Factory Service Manual wiring diagrams and trace the circuit(s) supplying the "dead" segment of the fuse box back to the source. Obviously, there is a break...
VERY ROUGH IDLE STALLS WHEN PUT IN GEAR
Hi there. The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drive train and the throttle pedal is not being depressed. When an engine is running at idle...
Can you put a drive shaft on crooked
The drive shafts that connect the transmission to the wheels are called half shafts or propeller shafts and in most cases are not able to be put in crooked. They are either put on using fitted flanges or straight shafts....
My odometer is out on my car. How do I find out how many miles is on it?
Hi Jasmine. Thanks for contacting us today. On a digital speedometer, the mileage is stored in the ECU and simply displayed on the gauge. By having the speedometer fixed, the milage should appear on the dash. You can set up...

Related articles

The Best Used Cars to Buy If You're a Rock Climber
If If you’re a rock climber, you want a vehicle that gets you where you need to go, even if the terrain gets rough. You may be living out of your vehicle at times, so you also want a rig...
The Best Used Cars to Buy If You Need a Lot of Trunk Space
Many Many people focus more on interior room than cargo carrying capacity. That’s natural if you have a large family or regularly carpool, but what about drivers who need to carry a lot of stuff most of the time and...
How Long Does a Top Dead Center (TDC) Sensor Last?
The The top dead center (TDC) sensor is the point from which the firing order is determined and the ignition system measurements are taken. The measurements are normally defined as before top dead center and after top dead center. The...