Q: Ignition broke off
The ignition on my truck broke off.
I believe the ignition lock cylinder is an integrated, non serviceable component in the steering column. The entire column may have to be replaced. I recommend having a qualified technician, like one from YourMechanic, take a look at it and see what it will take to get it working properly.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I bypass the heater core?
There are two hoses that go to the heater core on the firewall, these two hoses would need to be hooked together. This is the only way to bypass the heater. If you need some assistance with this, consider enlisting...
Car shut off and remained unresponsive since then - 2010 Mercedes-Benz S400 Hybrid
Hello. The PCM is a potential cause of the problem that you are experiencing. The PCM is the main computer for the car and could be malfunctioning. There could also be a problem with the electric motor of the hybrid...
Air compressor?
Hi there: Unfortunately, not having any details about the make, model or year of your vehicle we're unable to provide you with accurate information about your air compressor or vehicle issue you're experiencing. Please provide more information and we'll be...
Not getting power from the fuel pump driver module to fuel pump.
Hi there. If you are getting voltage to the inertia switch, the check the IFS switch and see if you are getting voltage. If there is no voltage, then the switch needs replaced. If there is voltage present, then either...
Rear wiper blade not working
The rear wiper arm may be stripped out. If you remove the retainer cover and then move the wiper arm by hand to see if the shaft does not move when you move the wiper arm. Replace the wiper arm...
How much would it cost do do a top end motor rebuild on my 1991 acura integra
Hi there. Unfortunately, this is a service that our mobile mechanics are not able to perform. In general however, this type of service ranges from $1,250 to $2,000 based on the location, parts used and damaged to the cylinder head....
Cooling fan not coming on
The electric radiator cooling fans are powered through relays, a fuse, and a temperature switch. The fan motors themselves should be tested (the fan motors can be independently powered, on or off the car, to see if they work properly)...
How much will it cost to replace my catalytic converter on a 1997 Honda accord?
Unfortunately catalytic converter replacement it's not currently offered on the your mechanic platform. I would recommend Consulting with some local exhaust repair shops in your area to get a quote for this particular service.
What is oem shock manufacturer of Nissan?
The shocks used by Nissan are currently manufacturered by Nissan.
Related articles
How to Tell If Your Car Switches Are Dying
Since Since every part of your car is controlled or operated by a switch in some fashion, it is to be expected that the switch will eventually fail. Some of the most commonly used switches in your car are: Power...
The Best Used Cars to Buy If You're a Dog Breeder or Trainer
These These days, dogs are more and more likely to travel with people than ever before. After all, what dog doesn’t ride in a car? As a breeder and trainer though, you’re probably more likely to carry along dogs than...
Symptoms of a Bad or Failing Ignition Coil
Common signs include the Check Engine Light coming on, engine misfiring, rough idle, a reduction in power, and the car not starting.
Browse other content
Maintenance
Cities