Skip the auto shop - Our mechanics make house calls

Q: If the tire pressure sensors are faulty, will that cause my Advance Trac light to come on?

asked by on

I have two issues...my tire sensors light is on and so is my Advance Trac light...I ttook my truck to the tire shop and they said i needed four new tire pressure sensors. When I read about the Advance Trac it doesn't say anything about faulty tire PRESSURE sensors only wheel speed and rotation speed.

My car has 120000 miles.
My car has an automatic transmission.

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Why is my VSC light on?

This is related to your vehicle's traction control. VSC stands for Vehicle Stability Control. Your car is equipped with wheel speed sensors on each of the four wheels that monitor wheel speed while relaying this information constantly to the traction...

Q: 2004 Ford Sport Trac where I have antifreeze leaking from back of upper area intake manifold I assume. I see that the intake manif

Hi there, thanks for writing in. You will need to have the cooling system pressure tested to see what is leaking. I know of coolant leak issues in the front area of the intake at the thermostat area, but not...

Q: engine will not start.

Hi there. The noise could be either the starter not working properly making a loud noise or the ignition system is not working making the engine crank with no spark. Check all of the wiring to the starter and to...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.