Q: I got into a accident and I want to know what the part is called that I have to fix

If the clutch had been slipping prior to the failure and now nothing happens, it may be worn out. Once the clutch wears, the mechanical connection between the engine and transmission is broken and power cannot be delivered. Have an...

Hello, you can turn the service lights off by disconnecting the negative battery cable for a few hours. To help find the pulled wire, have the dealership or technician use a scan tool capable of diagnosing canbus lines. The test will...

Hey there. If the system is an aftermarket type, then you would need to have the entire system removed or the system replaced with a new system. These systems all hook up a little different and only after looking at...

Hi. Usually when a manual transmission is hard to shift, it means that the slave cylinder is malfunctioning and needs to be replaced. The purpose of the slave cylinder is to make shifting of the transmission smooth and effortless for...

Hi There, Depending on what your mechanic was referring to with respect to the AC system, there are a number of possibilities that may cause problems within the A/C system. Several components make up the entire "A/C circuit." The locking...

Hi Sandy. Thanks for all the information - it's very helpful to initially provide some technical advice. It appears as if you might have a few different things going on with your Mercury Sable. First, in regards to the engine...

Hi Ben. Thanks for contacting us today. It appears you've got multiple component failures or problems that are causing this stalling issue you're experiencing. Two of the OBD-II codes that stand out are the P-0191 (https://www.yourmechanic.com/article/p0191-obd-ii-trouble-code-fuel-rail-pressure-sensor-circuit-range-performance-by-jamahl-walker) and P-2196 (https://www.yourmechanic.com/article/p2196-obd-ii-trouble-code-o2-sensor-signal-stuck-rich-bank-1-sensor-1-by-robert-kulp) codes....

A couple of things come to mind. One there could be a buildup of debris between the condenser and the radiator. You might not be able to see it from either side, but if you loosen the fasteners that hold...

It sounds like you may have a problem with the vehicle's stability control system or traction control system. The traction control system (https://www.yourmechanic.com/services/traction-control-light-is-on-inspection) monitors the steering and stability of the vehicle and engages when loss of traction has been detected....