The wife just got home from work in her 2017 Hyundai [Acc...
Responses
DannyR924
262 days ago
Hello and welcome to JustAnswer, my name is \*\*\*\*\* \*\*\*\*\* I have over 22 years of experience in this field. I'm so sorry for your inconvenience and hopefully, I can help. The battery needs to be at 12.6 volts and not drop less than 11 volts if it does the battery is no good and will need replacing. Also, while the vehicle is running the charging system needs to be between 13.5 to 14.5 volts, if is not than the [alternator](/topics-alternator-hyundai/) is not good. If the alternator is not charging i will discharge your battery and may ruin it as well. One more thing, make sure the battery terminals are tight and free of corrosion. Good luck.
Customer
262 days ago
Car was serviced less than a month ago terminals are spotless the car started immediately when she left work and ran fine all the way home tried jumpstarting it not even cranking
DannyR924
262 days ago
Do you have any lights or horn?
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I shuffle a CD?
When your CD is in shuffle mode, then it will play the songs in random order. To turn on shuffle mode, press the Random/Repeat button until Disc Random is displayed. If you are listening to an MP3 or WMA disc,...
Alternator bearing making noise
Hello, if you hear a bearing that is noisy in the alternator, the only repair is to replace the alternator. This is something that should be done sooner than later to avoid the bearing failing and locking up the alternator...
my car vibrate
This question will need to be more detailed for me to give helpful insight on this problem. For example, it's important to know when you are getting the vibration and if you feel it in the steering wheel or more...
The shift lever is hard to move.
When a shifter becomes hard to move, it is usually the interlock cable. AKA, shift cable (https://www.yourmechanic.com/services/shift-selector-cable-replacement). This cable slides in a housing and connects directly to the transmission. When this cables becomes worn, it gets hard to move inside...
7 codes transmission shifting bad could it b ecm
Having that many codes that go to one component may want you to quickly condemn the ECM. However, the vehicle should not have the ECM replaced until one or more of the codes retrieved calls for the replacement of the...
My truck selectively shifts hard
Hi there. From the description you provided, it seems you have more than one thing going on with your vehicle. The hard shifting, and the starting off in second and then jumping into first as you accelerate, could be a...
Ignition timing out of sequence.
Hi there. First you would need to know the firing order for the electronics on the distributor. The distributor number one on the firing order is the terminal on the right side at the front of the vehicle. Since you...
My 94 jaguar idles rough, stutters then cuts out. This happens when engine is cold or warm.
Check for a vacuum leak on the engine. A vacuum leak will cause the engine to rough rough and stall out when the engine is cold or hot. If there is no vacuum leak, then the Mass Air Flow Sensor...
Idler pulley broke off metal it was attached to after results from a crooked pulley and multiple serpentine belt slips.
You're right in that the stress will be too great and it will come apart again. This is not something you can fix with glue. You will need to take off all of the broken parts and replace them with...
Browse other content
Estimates
Cities
The wife just got home from work in her 2017 Hyundai [Accent](/topics-accent/) Sport realised she had not parked her car far enough back went to start it but had nothing no lights no radio no power windows no nothing car cranked b...
The wife just got home from work in her 2017 Hyundai [Accent](/topics-accent/) Sport realised she had not parked her car far enough back went to start it but had nothing no lights no radio no power windows no nothing car cranked but after a couple of attempts nothing tried jump starting it still would not start had to use shift lock release to get through the gears Mechanic's Assistant: Is the power loss consistent, or does it fluctuate? First time it has happened now there is nothing at all Mechanic's Assistant: Are you fixing your Accent yourself? What have you tried so far? Just jump starting it Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No told you about all there is