Q: How to tighten the emergency brake cable

asked by on

Its not holding how do u tighten the emergency brake cable

My car has 20000 miles.
My car has an automatic transmission.

Your vehicle has a self adjusting parking/emergency brake system. Consequently, if the brake is not properly applying and holding, it might be necessary to adjust the rear brakes to obtain the proper tension in the system. Adjustments require a bit of disassembly and thus you may prefer to have an experienced professional handle this. It will be safer, too, as opening up the rear brakes will expose you to brake dust which is not particularly great to breathe in. If you desire that this problem be diagnosed by a certified Mechanic, dispatched by YourMechanic right to your location, please request a parking brake is not holding diagnostic and the responding certified mechanic will get this resolved for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How to tighten the emergency brake cable

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the Brake Warning Light on the dash mean?

The Brake Warning Light on the dash of your Altima should come on briefly when you first crank the engine. It should turn off quickly afterward, though. If it doesn’t turn off, it can indicate a couple of different things....

Q: Not starting, battery drains

The alternator may test good but may be cause of draw on battery. You will need to have the battery draw isolated by checking the circuits until the draw is found. This can only be done by isolating circuits. I...

Q: Blower motor made strange noise and then stopped working

I believe it is certainly an issue they should have fixed if a recall was indeed issued for this exact issue. 40k miles can easily be driven in as little as two years, so there is no reason that the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.