Q: How much is it to replace the rear main seal on a 2007 Hummer H3

asked by on

How much is it to replace the rear main seal

My car has 140000 miles.
My car has an automatic transmission.

Hello. It is common for the rear main seal to leak on this engine. Over time the seal fails and this occurs. You will need to take this to a shop that can remove the transmission to change the seal out.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How much is it to replace the rear main seal on a 2007 Hummer H3

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Need to know where the ground wires for the motor to frame are located.

Hi there. Check the back of the engine around the cylinder head. The wire will either be a silver color wire and also black in color. The wire will connect to the frame or the body with an alternate ground...

Q: Car is running roughly at around 45 mph

Hello. It is possible that all of the spark plugs and spark plug wires need to be replaced in order to fix the problem on your Plymouth Grand Voyager. Also, if carbon has built up in your intake, throttle body,...

Q: My car is overheating when the air conditioning is on - 2007 Hummer H3

Hello. Running the A/C will put extra strain on the engine and cause it to heat up quicker. If your vehicle is overheating, you should keep it below 280 degrees at all cost. This is the temperature when extreme irreversible...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...