Q: Q: How do I use the mist feature?

asked by on

How do I use the mist feature?

The mist feature allows your wipers to wipe away a temporary amount of water, such as when you drive through a patch of mist. When you use this feature, the wipers will wipe only once. To use the mist feature, pull up on the wiper lever (located on the right side of the steering column), and immediately release.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the mist feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How Do I Make Homemade Washer Fluid?

There are numerous ways to make homemade washer fluid. The properties of each will vary based on the material used. Which method you choose is dependant on what you have available around the house and what you value. There are...

Q: motor fan

Hi there. As long as the engine is not overheating, you should be fine. When it's hot outside, and you run the AC on high, it will cause the engine to run hotter than normal, which requires the fan to...

Q: What causes a DTC P0010 to come up and how easy/difficult is it to repair?

The code P0010 is for a problem with the intake camshaft sensor. The camshaft sensor is common to have to be replaced to fix the no start condition. The sensor is on the front of the engine on front timing...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.