Q: How do I use the front reading lights?

asked by on

How do I use the front reading lights?

The front reading lights are available so that you can have light in the cabin of your vehicle even when it is dark out. They also double as the courtesy lights when your car is unlocked. The front reading lights are located on the overhead console. Each light has a button; to turn the light on, press the button. To turn the light off, press the button a second time.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the front reading lights?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Lights and gauges quit working, buzzing noise

Hey there, I would start by testing the fuses. This is a common problem on this generation of Mercedes diesels. There is an OVP relay that sits behind the battery which are also a known source of problems. I would...

Q: My car will not go into gear after being shifted from park to drive.

Hi there. Check the transmission and see if the cable is moving when the shifter is moved from the park position to the drive position. If the cable is not moving, then either the cable is broken or the shifter...

Q: How do I know if the occupant restraint controller (ORC) is working?

The occupant restraint controller (OCR) is what monitors the sensors detecting a crash, and is what sends the signal to deploy the air bags. This is a passive system, which means, it's working whenever the key is in the "Run"...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...