Q: Q: How do I use the air conditioning?

asked by on

How do I use the air conditioning?

Turning on the air conditioning couldn’t be easier. Simply press the A/C button, which you’ll find in the climate control cluster on the center console. A light will illuminate on the button confirming that the air conditioning has turned on. Press the button again to turn the air conditioning off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the air conditioning?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: When a/c was on, steam from under hood and a/c went warm on a hot day and on another day came out cool for a several minutes

The source of the steam should be the first thing repaired. It is highly probable that once the leak is repaired, the A/C system will begin to work again. There are two fluid sources under the hood that can create...

Q: Car still shaking after replaced coils and spark plugs codes cleared still showing misfire in coil 3

The code P0353 on this after you only had misfire codes and you changed the coil and plugs on cylinder number 3. You should disconnect cylinder coil and check connector and pins in coil are not damaged and if they...

Q: Q: How do I adjust the power seats?

Your car may be equipped with an eight-way power driver’s seat, and a six-way power passenger’s seat. These seats are controlled by electronic levers on the side of the seat. There is a horizontal lever on the passenger’s side, and...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...