Skip the auto shop - Our mechanics make house calls

Q: How do I turn the high beams?

asked by on

How do I turn the high beams?

A: High beams on your truck can become useful ...

High beams on your truck can become useful when driving at night when there are no street lamps or other cars around. The high beams can increase your range of vision. To turn on the high beams.

  1. Make sure your headlights are turned on.

  2. Pull the Headlamp Control lever past its resting position.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the bed divider?

The bed divider can keep small items in place in the bed of your truck. These items can be up to 400 pounds. To use the bed divider. Lift the handles on both sides of the bed divider and...

Q: Driver side low beam and taillight not working.

Hi there. The headlight bulbs got burned out due to the wires touching. Replace the low beam headlights and the taillight bulbs as they probably burnt out from the short in the system. If the bulbs are good, check the...

Q: What does it mean if the Low Oil Pressure light comes on in the dash?

Your car has quite a few important lights on the dash designed to provide information and alert you to impending problems. The Low Oil Pressure light (looks like a little oil can) should come on briefly during startup and then...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.