Q: How do I turn on the hazard lights?

asked by on

How do I turn on the hazard lights?

The hazard lights are an important safety feature. When the hazards are turned on, all four turn signal lights flash simultaneously, to alert surrounding drivers that there may be an emergency. To turn on the hazard lights, press the Hazard Light button, which is located on the center console. Press the button a second time to turn off the hazards.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I turn on the hazard lights?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the Distance to E feature?

The Distance to E feature approximates how many miles you can drive before your vehicle runs out of fuel. To view this feature, follow these steps: 1. Press the Up/Down buttons on the steering wheel until Trip 1 or 2...

Q: How do I use the Uconnect emergency assistance?

If you are in an emergency and unable to access your cell phone, you can use Uconnect, as long as your phone is paired with the Uconnect system. To use emergency assistance, press the Uconnect phone button, which is located...

Q: My right headlights isn't working

Hi there. In most cases, when one headlight is not working correctly, it's the headlight bulb that has worn out. However, it could also be a headlight relay that is faulty or another small electrical issue. It might be a...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...