Q: How do I remove the Intelligent Access (IA) mechanical key?

asked by on

How do I remove the Intelligent Access (IA) mechanical key?

The Intelligent Access (IA) key has a mechanical key inside it, should you ever need it. This key can be used to unlock the driver’s door. To access this key, slide the Release switch on the back of the IA key, and pull out the mechanical key.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I remove the Intelligent Access (IA) mechanical key?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Key coming right out of ignition

If your key comes out of the ignition switch while the engine is on or in the on position, the ignition switch could be faulty and may require replacement. If not repaired, this issue could start to cause other electrical...

Q: I have a 2003 ford explore I replaced water pump & thermostat but my car still over heats with Ac on

Hi There, Overheating with the AC on is generally caused by a couple of possibilities. When the AC compressor is beginning to fail, this may incur an increased load on the motor as it works harder than usual to turn...

Q: How do I install a headrest?

If a headrest has been removed, it can easily be reinstalled when you’re ready to use it again. To do so, press and hold the release button on the headrest support while inserting the headrest into the slots.

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.