Q: How do I play a USB device?

asked by on

How do I play a USB device?

A USB device can be played through the sound system. To do so, locate the USB outlet connector, which is in the center console compartment, and plug the USB device directly into the outlet. Then, press the Auxiliary button.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I play a USB device?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the steering wheel mode control button?

The steering wheel mode control button is on the left side of the steering wheel, and says MODE. Press this button to turn on the sound system, or, if the sound system is on, to select the audio source.

Q: My car is running hot. Do I need a thermostat? 2005 Nissan Maxima

Hi there - if the thermostat is stuck closed, then yes, that is the source of your overheating problem. However, it sounds like you have good coolant flow to the radiator. If so, the radiator may be clogged, and need...

Q: Leak in windshield caused electrical failure

At this point, make sure you have careful documentation of your experiences with the car, dates, names and all paperwork from dealer repairs, etc. Check work done at the dealer if at all possible when the car is returned to...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...