Q: How do I lock the doors with the keyless entry?

asked by on

How do I lock the doors with the keyless entry?

It’s very easy to lock the doors with the keyless entry system. To do so, first close all the doors, then press and hold the 7-8 and the 9-0 buttons at the same time.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I lock the doors with the keyless entry?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car doors not opening from outside

There is a high failure rate with your particular vehicle's door handles and window regulators. They are engineered with plastic components that wear out over time and break. Replacing either of these requires the removal of the interior door panel and...

Q: How do I arm the security system?

The security system will automatically be armed when you turn the vehicle off, remove the key from the ignition, close all of the doors, and lock the car. The security light will illuminate inside the vehicle for 30 seconds to...

Q: Q: Clutch pedal goes to floor

The most likely cause is that the clutch slave cylinder at the transmission is leaking. The leak would be coming from the transmission bellhousing at the bottom, if this is the case. The transmission clutch line from the clutch master...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...