Q: How do I enable/disable the keyless entry keypad autolock?

asked by on

How do I enable/disable the keyless entry keypad autolock?

Your truck comes with a Keyless Entry Keypad. This keypad has the ability to autolock to keep you from locking it yourself. To enable/disable the Keyless Entry Keypad Autolock.

  1. Turn the vehicle off and close all doors.

  2. Enter the factory code for the Keyless Entry Keypad.

  3. Hold down the 3-4 and press the 7-8 button.

  4. Let go of the 7-8 button before you let go of the 3-4 button.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I enable/disable the keyless entry keypad autolock?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Driver's door won't lock; washer fluid malfunctioning

Hello there, thank you for asking about your 1990 Oldsmobile Toronado. You can rule out a blown fuse for both of these issues. If the fuse were blown, the circuit would not operate at all. I'm guessing from your description...

Q: What indicates that the AdvanceTrac® with Roll Stability Control™ is active?

While you shouldn’t notice much when the AdvanceTrac® with Roll Stability Control™ activates, you may feel some sensations depending on what the system is doing and what the driving conditions are. Here’s what you should know: During Self-Check The traction...

Q: Car only runs when jumper the fuel pump

Check to see if you are getting power when you test the green with orange stripe wire going to the fuel pump module. If you have no power then check the the fuel inertia switch, in the left kick panel,...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...