Q: How do I drain the RamBox side storage units?

asked by on

How do I drain the RamBox side storage units?

The RamBox side storage units are waterproof, but they have a drain in case you want to wash them out. To drain the side storage units, just lift the edge of the plug at the bottom of the storage unit. When the RamBox is sufficiently drained, return the plug to the hole.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I drain the RamBox side storage units?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Startup problems, no dashboard lights but the headlights and radio are on

A faulty ignition could cause an issue where some systems receive "key on" power and others do not. If the vehicle is not starting with all dash lights and systems operational it could be an issue with the immobilizer circuit....

Q: Truck loses power with about a quarter tank of fuel left on

Hi there: In most cases a truck less than two years old shouldn't have problems with fuel pressure (which is what appears to be the reason why you're 2014 Ram is stalling out when the tank is down to 1/4)....

Q: How do I engage and disengage the automatic locking retractor (ALR) mode?

The automatic locking retractor (ALR) mode is a safety precaution that locks the shoulder belt in place, while tightening it to avoid any slack. ALR mode should always be used (if your car is equipped with it) when a child...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.