Q: How do I control the LCD display and backlight?

asked by on January 15, 2016

How do I control the LCD display and backlight?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I turn on or turn off the illuminated entry?
The illuminated entry system is a light system that helps light up your car when it is unlocked. When the illuminated entry is turned on, the courtesy lights help you enter your vehicle easily when you’re in the dark. The...
Car starts and then stalls.
If the problem started directly after changing these things then you need to make sure the parts you installed are the correct parts and are correctly installed (i.e. no leaks). Fuel filters are directional flow and fuel should only flow in...
Car labeled gross polluter
The carburetor may need to be adjusted while the gas analyzer is monitoring the levels. If the adjusting does not fix the problem, then the converter may be defective and need to be replaced. I recommend that you have a...
Carbon monoxide question
Thanks for your interesting scientific question. Actually, sort of unexpectedly, as the research turned out the principal hazard to the public (i.e., you) from CO (as measured by both mortality and morbidity statistics) has turned out to be the chronic...
Does our whole ABS system really need replacing?
Hi, thanks for writing in. In nearly 40 years of working on cars, and 30 years of anti-lock brake systems, I've never seen or heard of a single vehicle needing a "whole new ABS system" at one time, unless it...
Harsh ride over potholes
Hi there: In general, OEM parts are designed to maximize comfort and tend to wear out sooner than they really should. This is why OEM tires wear out so quickly. Aftermarket parts (https://www.yourmechanic.com/article/is-an-aftermarket-car-part-as-good-as-an-oem-car-part-by-brady-klopfer) (in general) are designed to maximize performance...
As my car warms up it starts to make a knocking noise. Then stalls when I stop.
Hello. Unfortunately these are typically signs of a more serious issue. Your engine may have thrown a rod. Which means the connecting rod that hold the piston in place has broken off. The only repair is to rebuild or replace...
Van wont strat after sitting overnight. What could be the problem?
Obviously, there is a fault in either the ignition system, the fuel system, or in the air induction system. If you are truly detecting the odor of gasoline, you might try holding the accelerator pedal firmly to the floor while...
Where is location of crankshaft sensor on 2011 BMW 550i 4.4 v 8
The crankshaft position sensor is located on the transmission bell housing on the passenger side. You have to remove a plastic splash guard that is attached with a Phillips head screwdriver. Remove the aluminum transmission guard with a 13 mm...

Related articles

A Buyer’s Guide to the 2012 Hyundai Azera
The The Azera offers an overall good value for the class and price point. The sleek styling is hard to overlook – for a large sedan it’s about as eye-catching as they get. This Hyundai also boasts respectable power that’s...
A Buyer's Guide to the 2012 Lexus GS
A A decade after it debuted, the 2012 Lexus GS still hasn’t found a strong foothold in the sport-sedan market. However, this doesn’t mean you shouldn’t take a closer look. It’s much more affordable than competitors like the BMW 3...
How to Get Rid of Oil and Grease on Your Car Door
Cleaning Cleaning your car (https://www.yourmechanic.com/article/4-essential-things-to-know-about-cleaning-the-interior-of-your-car) on a regular basis helps keep dirt and debris from building up on both its exterior and interior surfaces. This is easily accomplished most of the time, but oil and grease can be harder to...