Q: How do I close the power liftgate?

asked by on

How do I close the power liftgate?

If your vehicle is in power liftgate mode, you can use the power liftgate close button to effortlessly close the trunk. To do so, press the liftgate close button, which is located directly next to the latch on the trunk. The liftgate will then automatically close.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I close the power liftgate?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do you lock the trunk?

Locking the trunk of your Honda Accord is easy. You just need to: Insert the key into the lock on the trunk release latch located on the driver side floorboard. Turn it to the left to lock the...

Q: Q: Check engine light

Hi There, Generally, the check engine light comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor, a faulty O2 sensor, a bad...

Q: Will the Oil pressure sensor make car shut off

Hello there. You have a few different issues going on with your 2006 Chevrolet HHR. The oil pressure sensor will not shut the vehicle off, it can prevent the vehicle from starting if low oil pressure is detected though. If...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...