Skip the auto shop - Our mechanics make house calls

Q: How do I clean the rearview mirror?

asked by on

How do I clean the rearview mirror?

A: The rearview mirror can be easily damaged. ...

The rearview mirror can be easily damaged. Never use glass cleaner on the mirror, and do not spray a cleaning solution directly on the mirror. Instead, dampen a very soft towel with water, and lightly clean the mirror with that.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: How do I use the automatic dimming rear view mirror?

The rear view mirror is a very important safety feature, that gives you visibility through your rear windshield. At night, however, the glare from headlights can make it hard for you to use your rear view mirror. The automatic dimming...

Q: Cleaning with laquer thinner

Sure, I do it all the time, but in your case you don't really need to put in a strong concentration of lacquer. You could use half a gallon or two quarts to a whole tank of gasoline. I do...

Q: How do I recline the front seats?

It only takes a few seconds to recline the front seats. To do so, first locate the recline lever on the outboard side of the seat. Then, pull the lever, and push the seat into the desired reclining position. Release...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.