Q: How do I clean the leather seats?

asked by on

How do I clean the leather seats?

The leather seats in your truck are of high quality. To maintain their high quality, proper cleaning is necessary. To clean the leather seats.

  1. Clean up spills and stains quickly.

  2. Wipe the surface of the seats with a soft, damp cloth using not more than a mild soap and water solution.

  3. Use recommended conditioner on a regular basis.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I clean the leather seats?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Battery with white buildup

Yes, you'll need to clean the connections off because it will eventually start to corrode the metal. In order to do this, take your battery terminals off, clean it really well with a wire brush that you can get at...

Q: Idles very rough when heater/defroster is on

Hello, thank you for writing in. The vehicle is put under extra load when the climate control is turned on. The engine is impacted different ways by the different systems. Typically when the defroster is turned on, it uses the...

Q: Hood can’t stay shut

As far as I know, all vehicles meant to be used in the United States should have a double latch system. These systems have a primary latch which holds the hood down all the way and is released by the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.