Q: How do I choose a 12 or 24-hour clock?

asked by on

How do I choose a 12 or 24-hour clock?

Your vehicle’s clock is available in both 12 and 24-hour modes. To choose the setting for your clock, follow these quick steps: 1. Press the Trip Computer switch until the settings menu shows up. 2. Rotate the Trip Computer switch to Clock, then press the switch. 3. Rotate the Trip Computer switch to [24/12 Hr], then press the switch. 4. Rotate the Trip Computer switch to select 12h or 24h, then press the switch. Tips The clock can only be adjusted when the vehicle is not in motion.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I choose a 12 or 24-hour clock?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Getting fuel, spark, compression, air still no start

Hello, thank you for writing in. Considering you have taken on a lot of the main components all at once, you should take a moment to go back through the entire project thus far to make sure everything was done...

Q: Q: How do I set the clock?

Setting the clock is very easy. It requires just a few simple steps. Hold the “TIME” button until the numbers on the clock begin to flash. Rotate the “TUNE/SCROLL” knob on the right side of the entertainment console, until...

Q: What does the low engine oil pressure Warning Light mean?

The low engine oil pressure Warning Light is located on the instrument panel. When this light illuminates, the oil pressure is too low. You should pull over to a safe location and check the oil level. If the oil is...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...